SERIA CORPORATION



EQUIPMENT  





ELITE Printing Machine
SSP-1200AN-II
SSP-1200AN-II
Design Concept
Packed durability and operatability into compact body. Pursuing effectiveness but do not compromised in quality of printing. We are sure the unit will contribute for improving productivity.
Feature
  • Squeegee auto pressure control
  • High cost performance
  • Simple operation with high performance capability
Specification
Max. Print SizeW1200*D800mm
Max. Frame SizeW1500*D1180mm
Min. Frame SizeW450*D780mm
Frame Thickness20t-35t mm
Frame HoldersSupport at Front and Rear Side (Front: Swing Type)
6 Position Pneumatic Clamp + Manual Knob at Front and Rear Side Each 2 Positions
Frame Holder Shaft LockAir Clamp
Pneumatic ClampFrame Horizontal Accuracy Supported by Pneumatic Cylinder
Peel Off0-20mm (Adjust by Dial)
Peel Off SystemMechanical type, synchronizing to squeegee drive (flat when ink coat)
Squeegee Pressure0.1-0.5MPa (8-80kg)
Squeegee Adjustment40mm
Squeegee Angle60°-80° fix by lever
Squeegee Speed100-800mm/s (inverter control)
Squeegee Stroke AdjustmentRandom Position Set by Proximity Switch
Clearance Adjustment3-35mm Handle Rotation (with Guage)
Print Table SizeW1350*D1100mm
Vacuum AreaW1200*D820mm
Vacuum Hole Diameter / Pitchφ1.4mm / 20mm
Table Fine Adjustment MethodMicro knob with 0.1mm scale
Table Fine Adjustment VolumeX. Y. ±10mm θ± approx. 1.5°
Table Height900mm
DimensionsW1350*H1330*D1854mm
Weight450kg
Power SupplyAC200V / 3φ / 2.3kw
Compressed Air30 litters/min. (0.56MPa)