SERIA CORPORATION

Full-Auto Reel to Reel Printing machine with CCD Camera

SFA-RR160IP

Design Concept

Possible to handle flexible substrates such as TAB/COF, with high precision printing quality. Transfer thin film without stress and equipped with high speed image processing unit, corresponding to fine pattern printing. Equipped squeegee motorized down stop mechanism (OP) make possible to perform print under low pressure.

Feature

High speed image processing (with μm unit setting, off-set function)
Motorized squeegee down stop volume adjustment (OP)
Buffer mechanism and tension control function by vacuum system
Printing parameter setting by touch panel

Function

Standard

Option

No settings

Squeegee/Scraper motorized down stop

Squeegee/Scraper auto 0 point adjustment

Squeegee swing

Head bias

Double squeegee

Squeegee auto pressure

Scraper auto pressure

Scooper

Squeegee/Scraper L/R independent pressure

Frame air clamp

Back squeegee

Rail and air off contact

Motorized off contact

Front/rear off contact

Frame fine adjustment knob

Table fine adjustment konb

Carriage transfer

Print table transfer

Web transfer

Table template

Table work clamp

Chassis alignment

XYθ print table

XYθ alignment stage

Image processor alignment

Color large size display

Print condition touch panel setting

Clean cover

Air device clean specification

Area sensor

Specification

Max. Print Size	W200*D158mm
Min. Print Size	W50*D48mm
Frame Size	W320D320-W450D450mm
Squeegee Stroke	350mm
Peel Off	0-20mm
Squeegee Pressure	L/R independent auto. Pressure
Work Guide Width	Parameter setting by touch panel
Driving Mechanism	Resolution: 0.002mm
Alignment Accuracy	±10µm
Image Processing	Binary level + Out Line Process
View Range	7.5*7.5mm
Tape can be used	48.0-158.0mm
Max. outer dimension of usable reel	φ750mm
Mounting inner diameter of usable reel	with 1" or 3" air chuck
Power Supply	3φ AC200V 50/60Hz 4.0kw
Compressed Air	50 litters/min. (0.54MPa)
Dimensions	L3950W1347H1800mm
Weight	1000kg