SERIA CORPORATION



EQUIPMENT  





Full-Auto Printing Machine
SFA-PC610CTN
SFA-PC610CTN
Design Concept
Best selling fully automatic screen printer for print substrate. It is possible to produce original unit according to customer's requirement with various options.
Feature
  • Precise alignment with image processor
  • Work transfer with carrier table with mechanical clamp
  • High speed
Specification
Max. Work SizeW610*D610mm
Min. Work SizeW250*D250mm
Work Thickness0.4t-2.3t mm
Max. Frame SizeW1100*D1100mm
Min. Frame SizeW660*D660mm
Frame Thickness30t-40t mm / 20t-30t mm (with Spacer)
Screen Fine Adjustment VolumeX. Y. ±10mm θ± approx. 1.5°
Peel Off0-20mm
Squeegee Pressure6-80kg
Up/Down Adjustment Volume45mm
Squeegee-Lift Volume40mm
Squeegee Angle60°-90°
Squeegee Speed20-600mm/sec.
Squeegee Stroke±400mm
Clearance Adjustment0-15mm
Sub-Lift Volume380mm
Print Table SizeW800*D980mm
Vacuum AreaW600*D600mm
Vacuum Hole Diameter / Pitchφ2.5mm / 20mm
Print table work clamping marginMinus50-40mm
Print table work clamp shifting volumeMax. 184mm
Print table work clamp plate1.0t mm
Print table work clamp adjusting methodStepping motor driven (sychronizing to centering drive)
Carrier table sizeW150*D800mm
Carrier table work fixing methodVacuum & mechanical clamp ( 2 positions)
Carrier table vacuum hole diameterφ2.5mm / 20mm
Carrier table work vacuum checkwith digital setup pressure sensor
Carrier table drive systemAC servo motor driven & belt drive
Carrier table stroke1200mm
Loading conveyor speed50-500mm/sec.
Alignment table alignment systemEdge alignment
Alignment talbe possible alignment size250-610mm
Stopper, pusher pin driveStepping Motor
Alignment table alignment accuracy±0.3mm
Processing SystemBinary level + Out Line Process
CCD Camera2sets
Ejection table sizeW150*D800mm
Ejection table stroke1200mm
Ejection conveyor speed50-500mm/sec.
Tact time8 sec/panel
Dimensions
Weight1200kg
Power Supply3φ AC200V 50/60Hz 3.5kw
Compressed Air100 litters/min. (0.54MPa)