Japanese
Full-Auto Printing Machine with CCD Camera (high speed type)
SFA-PC605YIP-N
- Design Concept
- Fully automatic screen printing line system equipped with loading and unloading unit. High speed/high precision screen printer.
- Feature
-
- Stacked loading, alignment, print, ejection and receiving line
- High speed (less than 6 sec./panel)
- Precise alignment by image processor
Specification
| Max. Work Size | W510*D605mm |
| Min. Work Size | W250*D400mm |
| Max. Print Size | W500*D600mm |
| Work Thickness | 0.3t-2.0t mm |
| Max. Frame Size | W950*D950mm |
| Min. Frame Size | W680*D680mm |
| Frame Thickness | 30t-40t mm |
| Frame Holders | Pneumatic Clamp 4 Points Swing Type |
| Frame Bar Holder | Rear Size Pneumatic Clamp |
| Peel Off | 0-20mm |
| Peel Off System | Cam and AC servo motor driven (flat when ink coat) |
| Squeegee Pressure | 6-80kg |
| Up/Down Adjustment Volume | 45mm |
| Squeegee-Lift Volume | 40mm |
| Squeegee Angle | 60°-90° |
| Squeegee Bias Angle | ±3° |
| Squeegee Speed | 20-600mm/sec. |
| Squeegee Stroke | 700mm |
| Scooper | Unit Type |
| Clearance Adjustment | 0-15mm |
| Sub-Lift Volume | 380mm |
| Print Table Size | W730*D700mm |
| Table Stroke | 950mm |
| Print table drive system | AC servo motor driven & belt drive |
| Vacuum Area | W490*D590mm |
| Vacuum Hole Diameter / Pitch | φ1.4mm / 10mm |
| Alignment Accuracy | X. Y. θ ±0.005mm |
| Alignment drive system | Ball screw and 5-phase stepping motor |
| Processing System | 0.002mm |
| CCD Camera | Gray scale, binary level, outline process chage system |
| CCD Camera Resolution | 2sets |
| Ejection conveyor pass line | 890mm |
| Ejection conveyor width | 630mm |
| Ejection conveyor length | 1000mm |
| Ejection conveyor speed | 2-20m/sec. |
| Pass line | 1028mm |
| Tact time | 6 sec./panel |
| Dimensions | |
| Weight | 3000kg |
| Power Supply | 3φ AC200V 50/60Hz 6kw |
| Compressed Air | 130 litters/min. (0.6MPa) |