Japanese
Vacuum Coater
SVM-5060CT
- Design Concept
- This unit is performing coating paste under vacuum condition. Possible to plug a hole without void (air bubble). As using screen frame it is possible to selct the area to be coat and will contribute for save cost.
- Feature
-
- Space saving inside of chamber space (reducing vacuum time)
- Compact, save space
- Corresponding to use screen frame
Specification
| Max. Work Size | W610*D510mm |
| Work Thickness | 0.4-8.0t mm |
| Roller Driving System | AC servo motor & timing belt driven |
| Roller Max. Stroke | 750mm |
| Roller Running Speed | 10.0-100.0mm/sec. |
| Roller Rotation Speed | Max. 16.8m/min. (20 Steps) |
| Coat / Scraping Changeover | Air Cylinder Individual Change |
| Squeegee Pressure for Coating | 0-80kg |
| Squeegee Up/Down Volume for Coating | 0-5mm |
| Material of Squeegee for Scraping | Urethane Rubber |
| Squeegee Pressure for Scraping | 0-80kg |
| Clearance Adjustment Volume | 0-10mm |
| Clearance Adjustment System | Clearance to be Adjusted by Up/Down of Squeegee Roller Unit |
| Clearance Adjustment Method | Manual Adjust by Adjust Knob |
| Table Size | W610*D750mm |
| Print Table Height | 900mm |
| Table Height Adjustment | 0-15.0mm Motorized |
| Table Up/Down Adjust Method | Stepping Motor and Ball Screw Drive |
| Work Clamp | Clamp mechanism at Front and Rear Side of Table |
| Clamp Plate Adjust Method | Manual Knob Adjustment |
| Clamp Size | Max. 510mm |
| Thickness Range to Clamping | 0.4-8.0mm |
| Cooling Water for Vacuum Pump | Min. 0.1MPa |
| Vacuum Pump Pressure | Max. 0.4MPa |
| Vacuum Pump Flow | 3.5-8.0 litters/min. |
| Duct Exhaust Temperature | Max. 30° (Note: Non Condensing) |
| Duct Exhaust Pressure | -196Pa 0.5m³/min. |
| Duct Exhaust Rough Flow | 0.5m³/min. |
| Power Supply | 3φ AC200V 50/60Hz 11kw |
| Compressed Air | 50 litters/min. (0.6MPa) |
| Dimensions | W1875*H1640*D2315mm |
| Weight | 2000kg |